[?SG] TOPPING DX7 Pro+ (DX7PRO+) ES9038PRO DAC and Headphone Amp

(>‿◠)✌ SAM AUDIO

? OFFICIAL TOPPING DEALER - 1 Year Local Warranty & Aftersales Support

? Receive within 3 Days - Well packaged from SG warehouse

? Responsive reply - We strive to reply within 5 mins

?️ Visit Us @ Sim Lim Sqr #01-56, S188504 - Demo units available (Lvl 1 Beside Escalator)

--

This time we did it better

DX7 Pro+ uses ESS SABRE ES9038PRO, with 32bit Hyer-steam architecture, achieves ultra-high performance in the audio field. Each channel of the DX7 Pro+ will be arranged in parallel by 4 conventional balanced channels. This makes the performance of DX7 Pro+ even better.

--

Descriptions:

>Brand New I/V conversion

Abrand new I/V conversion circuit is designed for better quality audio reproduction. The unique circuit design provided lower distortion, lower noise while occupying less space. The new circuit is pushed close to the limit of physics so that we are able to squeeze out the last bit of performance of the DAC chip.

>Built-in NFCA Headphone amp

The new DX7 Pro+ has the NFCA circuit optimized for this unit, giving the ultra low noise and distortion. It pairs with high sensitivity IEMs and power hungry high impedance headphone nicely.

>IIS input supports up to DSD512 native

When there is a better unterface, you can the HDMI cable to directly send the IIS signal into the DX7 Pro+'s ESS9038PRO for better decode. IIS inout can support up to PCM32bit768kHz & DSD512native. The IIS inout provides phase settings, DSD channel settings, and DSD indicator pin delection settings, which are compatible with most digital interfaces on the market that use the HDMI interface to output IIS signals.

>Plug and play turn your PC into a HIFI source

DX7 Pro+ has a wide range of compatibility: Windows 10 and above, MAC, Linux,IOS,Android can be plug and play. DX7 Pro+ uses 2nd generation 8 core XMOS XU208, USB supports up to PCM32bit768kHz and DSD512 native.

--

Specifications:

> Max playback support

USB: 32-bit/768kHz PCM, DSD512 Native, DSD256 (DoP)

COAX/OPT/AES IN: 24-bit/192kHz PCM, DSD64 (DoP)

IIS IN: 32-bit/768kHz PCM, DSD512 Native, DSD256 (DoP)

BT IN: LDAC, AAC, SBC, aptX, aptX LL, aptX HD, aptX Adaptive

>DAC specs

-RCA

THD+N @1kHz (A-wt): <0.00008%

THD @20-20kHz 90kBW: <0.0008%

SNR @ 1kHz (A-wt): 127dB

Dynamic range @ 1kHz (A-wt): 127dB

Frequency response: 20H-20kHz (±0.1dB), 20Hz-40kHz (±0.3dB)

Output level: 2.1Vrms@0dBFS

Noise @A-wt: <1.0uVrms

Channel crosstalk: -126dB@1kHz

Channel balance: 0.3dB

Output impedance: 100Ω

-XLR

THD+N @1kHz (A-wt): <0.00006%

THD @20-20kHz 90kBW: <0.0003%

SNR @ 1kHz (A-wt): 133dB

Dynamic range @ 1kHz (A-wt): 133dB

Frequency response: 20H-20kHz (±0.1dB), 20Hz-40kHz (±0.3dB)

Output level: 4.2Vrms@0dBFS

Noise @A-wt: <1.0uVrms

Channel crosstalk: -139dB@1kHz

Channel balance: 0.3dB

Output impedance: 100Ω